...

For this product
SONIQ OFFERS Free 36 Month Warranty
Product registration is required

IPS UltraHD 3840x2160 pixels LED Backlight Panel
3D Flicker Free LED Backlight LCD TV With Free 3D Glasses
Fast and Powerful ARM Dual Core CPU and Four Core GPU Processor Delivers Super Performance
Android 4.2 (Jelly Bean) platform Simple, Beautiful, Useful
ACE-PROU2 Advanced Color Engine provides Brilliant and fresh color
Three 4K2K Ultra HD inputs (3 x HDMI)
USB Host 2.0 & 3.0 for Multimedia Play, HID device support
Full Function QWERTY Keyboard Remote
Efficient energy saving mode
Built In Web Browser
Built In WiFi comply with 802.11b/g/n standard,provides powerful high-speed performance
Panel Size 64.53 Inches (1639.062mm) diagonal
Panel Native resolution3840x2160 pixels
Brightness(3D)450cd/? (2D)
170cd/? (3D)
Contrast Ratio1400:1
Response Time5ms
Display Area HxV(mm)1428.48 (H) x 803.52 (V)
Quick Motion100/120Hz
SMART TV Yes
Search EngineYes
Internet Video Yes
Social TV Yes
SONIQ Apps Yes
Web Browser Yes
3D Yes
2D to 3D Converter Yes
DLNA Yes
Touch Screen No
Smart Phone Remote support No
Wireless LAN Built-in Yes
Wireless LAN Adapter Support No
USB Multimedia Support Movie
Picture
Music
Film Mode Yes
HDMI-CECNo
HDMI 1.4 3D Auto Setting Yes
HDMI 1.4 A / Return Ch. Support No
Auto Channel Search Yes
OSD language English
Auto Volume Leveler Yes
Auto Power Off Yes
Clock & on/off timer Yes
Sleep timer Yes
Sound ModeYes
Picture-in-Picture No
Broadcasting StandardsDVB-T (MPEG-2//H.264)
Bandwidth (7MHz)Australia Channel Number 6?69 (177.5?816.5 MHz)
Bandwidth (8MHz)New Zealand Channel Number 21?69 (
View Manual
Download firmware

  1. Unzip firmware on computer.
  2. Switch off TV and remove any other USB storage device from USB ports
  3. Connect USB flash drive with firmware files to the white USB port next to antenna port on TV
  4. Press and hold down CH+ button first on TV (not the one on remote) then press and hold down Standby button on TV (not the one on remote) to switch on TV until power indicator light flashes
  5. Firmware update will start automatically and the whole process may take about 10 minutes to finish. TV screen will remain off for the first 5 minutes but the power indicator light will keep on flashing to indicate that firmware is being updated. Do not disconnect TV from power point or interrupt firmware update. Doing so may damage TV and void the warranty
  6. When power indicator light stops flashing for more than 15 seconds, firmware update is finished. Please remove USB flash drive and switch on TV and follow on screen instruction to set up TV and scan channels again.
Important note: The USB flash drive must be in the file system FAT32. If not, the TV will just turn on as normal without installing the firmware.

There are 3 stages of the installation on the screen. They follow this sequence:

  1. TV standby light (bottom centre) flashes and light on screen
  2. Blue screen with progress bar
  3. Blue screen with progress bar again
Please note: Do not disconnect USB flash drive between stages. Please ensure all these stages are observed.